How to Read a Peptide Certificate of Analysis (CoA)

A line-by-line guide to a peptide certificate of analysis: lot numbers, HPLC purity, identity testing, and what a CoA can and cannot show.

Signal IQ Editorial5 min read · Updated Nov 8, 2026
How to Read a Peptide Certificate of Analysis (CoA)
In this article
  1. What a CoA is, and is not
  2. Lot numbers and traceability
  3. Purity: reading HPLC results
  4. Identity is separate from purity
  5. Other lines you may see
  6. Red flags
  7. How a CoA relates to reconstitution and storage
  8. A simple review habit
  9. Working with clinicians and pharmacists
  10. Frequently asked questions

A peptide certificate of analysis (CoA) is a laboratory report on one specific lot of material. It typically lists the compound, lot number, testing laboratory, methods, results against stated limits and a date. A high purity figure is a useful signal, but it does not show that a product is sterile, free of endotoxin or safe for injection.

Key takeaways
  • A CoA only applies to your vial if the lot number on the label matches the lot on the report.
  • Purity (usually HPLC peak area) and identity (usually mass spectrometry) are separate questions and both should be present.
  • Standard research CoAs generally do not cover sterility, endotoxin or stability after reconstitution.
  • Missing lot numbers, cropped chromatograms, unnamed labs and impossible figures are red flags.
  • Medical products belong in supervised care with a clinician or pharmacist, not a self-interpreted PDF.

What a CoA is, and is not

A CoA summarises analytical results for a tested sample from a batch. A well-formed one names:

  • The product, sometimes including the salt form.
  • The lot or batch number that was tested.
  • The laboratory, and ideally its accreditation.
  • The methods used, such as HPLC or mass spectrometry.
  • Results compared with specification limits.
  • The testing date and a reviewer or approver.

A typical research-grade CoA gives you no assurance on several points that matter for injected products:

  • Whether the material is sterile enough for injection.
  • Whether endotoxin was measured against limits set for products given by injection.
  • How the peptide holds up after transit, freezing or being dissolved.
  • Whether your vial actually came from the tested lot.
  • Regulatory approval or compliance with pharmacy compounding rules.

Treat the document as one piece of evidence. The lesson on reading a certificate of analysis covers the basics in course form.

Lot numbers and traceability

The lot number is often the most important field. Without a match between your vial and the report, you cannot honestly say the CoA describes your material.

  • Does the vial label show the same lot as the CoA?
  • Was the report issued before your product shipped, and is that lot still current?
  • Is one report reused across many shipments?
  • If bulk material was tested once and split into many vials, is that explained?

If traceability is unclear, treat the report as marketing rather than quality control. Pharmacists work differently: they want documentation linking each incoming lot they actually use to a supplier’s certificate, which is a higher bar than a screenshot on a product page.

Purity: reading HPLC results

Purity is normally the share of total signal that belongs to the principal peak when the sample is run through high-performance liquid chromatography (HPLC). You may see wording such as “at least 98.0%” or “purity 99.1%”.

What is on the chromatogram

  • Main peak: the intended peptide.
  • Impurity peaks: by-products such as sequences with missing amino acids, close relatives of the target, or mirror-image forms.
  • Specification: the pass or fail window the supplier chose, which may differ from any regulatory standard.

High purity reduces one category of risk, namely wrong or mixed sequences. It does not rule out clumping during storage, breakdown over time, or contaminants the test panel never looked for. Purity was also measured at test time on dry material, not on your solution weeks after reconstitution.

Identity is separate from purity

A pure sample of the wrong peptide is still wrong. Look for identity confirmation, most often mass spectrometry, amino acid analysis or peptide mapping.

  • A measured molecular weight or m/z value consistent with the named sequence.
  • A named method, for example LC-MS.
  • A compound name that matches the product you believe you have.

If identity data is missing, purity alone is weaker evidence.

Other lines you may see

LineWhat it tells you
Water content (Karl Fischer)How much of the powder weight is water rather than peptide
Residual solventsManufacturing carryover
AppearanceColour of the cake and clarity once dissolved
Endotoxin testUsually found on pharmacy-grade paperwork and seldom on basic research reports

None of these replaces sterility testing of an injectable preparation. Compounding standards published by the U.S. Pharmacopeia call for suitable testing and an assigned use-by window for sterile products, which is one reason supervision and legal channel matter as much as a percentage.

Red flags

  • No lot number at all.
  • Blurred or cropped chromatograms that hide small peaks.
  • Old dates on a listing described as the current batch.
  • Purity over 100% or other impossible values.
  • No laboratory name, or one that cannot be verified.
  • A report for one compound shown next to a different product.
  • A CoA shared only as an unattributed image on social media.
Note: Many peptides are research-use-only and not approved by the FDA. A CoA does not change that status. See research use versus human use.

How a CoA relates to reconstitution and storage

Once powder is dissolved you have a new product with new risks: concentration mistakes, microbial growth and time-dependent breakdown. The report describes the dry material as it was on the day of testing. What happens to the liquid you actually use depends on how it is labelled, handled and kept cold. Read how to reconstitute peptides, bacteriostatic vs sterile water, and how to store peptides. The peptide shelf-life guide and the lesson on the cold chain add context.

A simple review habit

  1. Photograph the vial label and lot when a product arrives.
  2. Save the original CoA file or its link.
  3. Check that both identity and purity data are present.
  4. Note any mismatch between the label and report.
  5. If a clinician is involved, share the summary with them.

Working with clinicians and pharmacists

For anything that forms part of supervised care, a clinician or pharmacist is the right person to interpret a CoA. Useful questions include whether the lot went into a dispensed preparation, whether the product was released with sterility and endotoxin results, and how long it may be kept once mixed. Unclear answers are a reason to hold off until the paper trail is sorted out. For other questions, ask Pulse or browse the Signal Library.

Frequently asked questions

Is a peptide with a 99% purity CoA safe to inject?

No. The figure describes how much of a tested sample is the target peptide. It says nothing about sterility, endotoxin, regulatory status, or whether your own vial came from that lot.

What if the vial lot and the CoA lot disagree?

Record the lot on the vial, note the mismatch and do not assume the report applies. Stop use until the supplier explains the discrepancy.

Is HPLC the same test in every lab?

No. Methods, columns and reporting conventions differ. Compare reports only when the methods are described and the lots match.

Why do pharmacies ask for different documents than research suppliers?

A compounding pharmacy must qualify its suppliers, link paperwork to each lot it uses and, for sterile products, usually run extra tests required by USP standards and state regulations.

Should I trust a CoA posted as an image on social media?

Treat it as unverified. Ask for the original file with the laboratory name and lot-specific chromatograms.

Does a CoA show a peptide is not contaminated?

Only for the substances the panel tested. Contamination outside that panel, such as microbes or endotoxin, would not appear.

Still have questions? Ask Pulse, Signal IQ’s free AI research assistant, or compare doses in the Peptide Dosage Chart.

Ask Pulse

Educational content only. Nothing here is medical advice or a recommendation to use any compound. Many peptides discussed are research compounds not approved for human use. Talk to a qualified clinician about your situation. Signal IQ does not sell peptides.

Keep reading